Мы уже писали о том, какой замечательный инструмент как LLD есть в Zabbix.
Тогда же мы посетовали, что составные индексы в SNMP-таблицах в системе не поддерживаются, что несколько ограничивает возможности по применению. Например, если вам нужно сделать Discovery двух RAID-контроллеров на одном сервере и всех физических и логических дисков за ними, то, увы, мы этого сделать не могли без костылей. Работало только для первого RAID-контролера в списке. Но, как говорится, все течет, все меняется! И вот долгожданный релиз 2.2 убрал это связывающее нас по рукам ограничение.
Рассказать о нововведении я бы хотел на примере шаблона для HP серверов. Но сначала немножко вспомним про SNMP.
SNMP
Итак, что такое LLD для SNMP?
Это добавление элементов данных на основе строк в таблице SNMP. Каждая строка это один новый элемент данных на основе прототипа. А что такое вообще таблица SNMP, как ее найти среди других объектов SNMP в MIB?
Это объект (OBJECT-TYPE), чей атрибут SYNTAX определен как SEQUENCE OF X, где X -последовательность объектов, описывающая столбцы таблицы. Сами строки таблицы хранятся этажом ниже в другой объекте, и от таблицы отличаются наличием АТРИБУТА INDEX, уникального ключа, использующегося для идентификации строк. Что это я сказал? Лучше пример.
Возьмем всем известную таблицу ifTable с интерфейсами из IF-MIB, ее MIB в дереве SNMP будет выглядеть вот так:
А результат запроса к такой таблице на каком-нибудь коммутаторе будет выглядеть вот так:
Причем, index является составной частью OID, и как раз служит, чтобы отличить столбцы одной строчки таблицы от другой:
administrator@zproxy2:~$ snmpwalk -c public -v 2c -On 10.2.0.108 IF-MIB:ifDescr
.1.3.6.1.2.1.2.2.1.2.1 = STRING: D-Link DES-3200-18 R1.28 Port 1
.1.3.6.1.2.1.2.2.1.2.2 = STRING: D-Link DES-3200-18 R1.28 Port 2
.1.3.6.1.2.1.2.2.1.2.3 = STRING: D-Link DES-3200-18 R1.28 Port 3
.1.3.6.1.2.1.2.2.1.2.4 = STRING: D-Link DES-3200-18 R1.28 Port 4
.1.3.6.1.2.1.2.2.1.2.5 = STRING: D-Link DES-3200-18 R1.28 Port 5
.1.3.6.1.2.1.2.2.1.2.6 = STRING: D-Link DES-3200-18 R1.28 Port 6
.1.3.6.1.2.1.2.2.1.2.7 = STRING: D-Link DES-3200-18 R1.28 Port 7
.1.3.6.1.2.1.2.2.1.2.8 = STRING: D-Link DES-3200-18 R1.28 Port 8
.1.3.6.1.2.1.2.2.1.2.9 = STRING: D-Link DES-3200-18 R1.28 Port 9
.1.3.6.1.2.1.2.2.1.2.10 = STRING: D-Link DES-3200-18 R1.28 Port 10
.1.3.6.1.2.1.2.2.1.2.11 = STRING: D-Link DES-3200-18 R1.28 Port 11
.1.3.6.1.2.1.2.2.1.2.12 = STRING: D-Link DES-3200-18 R1.28 Port 12
.1.3.6.1.2.1.2.2.1.2.13 = STRING: D-Link DES-3200-18 R1.28 Port 13
.1.3.6.1.2.1.2.2.1.2.14 = STRING: D-Link DES-3200-18 R1.28 Port 14
.1.3.6.1.2.1.2.2.1.2.15 = STRING: D-Link DES-3200-18 R1.28 Port 15
.1.3.6.1.2.1.2.2.1.2.16 = STRING: D-Link DES-3200-18 R1.28 Port 16
.1.3.6.1.2.1.2.2.1.2.17 = STRING: D-Link DES-3200-18 R1.28 Port 17
.1.3.6.1.2.1.2.2.1.2.18 = STRING: D-Link DES-3200-18 R1.28 Port 18
.1.3.6.1.2.1.2.2.1.2.1024 = STRING: D-Link DES-3200-18 R1.28 802.1Q Encapsulation Tag 0001
.1.3.6.1.2.1.2.2.1.2.1063 = STRING: D-Link DES-3200-18 R1.28 802.1Q Encapsulation Tag 0040
.1.3.6.1.2.1.2.2.1.2.1064 = STRING: D-Link DES-3200-18 R1.28 802.1Q Encapsulation Tag 0041
.1.3.6.1.2.1.2.2.1.2.5121 = STRING: D-Link DES-3200-18 R1.28 rif0(10.2.0.108)
В IF-MIB:ifTable index простой и равен одному столбцу в таблице: ifIndex. Zabbix мог находить элементы данных в таких таблицах еще в момент появления LLD, с версии 2.0, а обнаружение всех доступных интерфейсов из таблицы ifTable есть в стандартном шаблоне. О том же, как настроить LLD с простыми индексами мы как раз писали на хабре в прошлый раз.
Но в SNMP бывают таблицы, где индекс составной и выглядит посложнее, чем просто одинокая цифра. Вот например таблица TCP-MIB:tcpConnTable, в которой хранятся все текущие соединения. В этой таблице индекс составной и состоит из четырех объектов:
Local IP Address.Local Port.Remote IP Address.Remote Port
Вот они в MIB-файле:
А вот эти индексы при опросе оборудования:
administrator@zproxy2:~$ snmptable -c public -v 2c -Os -Ciw 150 10.2.0.108 TCP-MIB:tcpConnTable
SNMP table: tcpConnTable
index tcpConnState tcpConnLocalAddress tcpConnLocalPort tcpConnRemAddress tcpConnRemPort
0.0.0.0.22.0.0.0.0.0 listen 0.0.0.0 22 0.0.0.0 0
0.0.0.0.80.0.0.0.0.0 listen 0.0.0.0 80 0.0.0.0 0
или если опрашивать snmpwalk:
administrator@zproxy2:~$ snmpwalk -c virton -v 2c -Os 10.2.0.108 TCP-MIB:tcpConnTable
tcpConnState.0.0.0.0.22.0.0.0.0.0 = INTEGER: listen(2)
tcpConnState.0.0.0.0.80.0.0.0.0.0 = INTEGER: listen(2)
tcpConnLocalAddress.0.0.0.0.22.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnLocalAddress.0.0.0.0.80.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnLocalPort.0.0.0.0.22.0.0.0.0.0 = INTEGER: 22
tcpConnLocalPort.0.0.0.0.80.0.0.0.0.0 = INTEGER: 80
tcpConnRemAddress.0.0.0.0.22.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemAddress.0.0.0.0.80.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemPort.0.0.0.0.22.0.0.0.0.0 = INTEGER: 0
tcpConnRemPort.0.0.0.0.80.0.0.0.0.0 = INTEGER: 0
Раньше такие индексы вводили Zabbix в ступор. В 2.2 теперь мы можем мониторить и такие таблицы. Давайте рассмотрим на практическом примере.
HP Insight Manager
Итак, у нас есть сервер HP Proliant, а в нем стоят два RAID-контроллера. Кроме всего прочего про систему нас интересует состояние всех жестких дисков, подключенных к RAID-контроллеру.
Чтобы получить доступ к этим данным, если у нас ОС Windows или Linux, нам необходимо установить HP Insight Management Agent, который и выложит эти информацию для доступа по snmp. Останется ее только забрать.
Чтобы понять, что нам забирать, обратимся к MIB-файлу. Для RAID это CPQIDA-MIB, а для физических дисков это таблица CPQIDA-MIB:cpqDaPhyDrvTable. Как мы видим, индекс здесь состоит из двух частей:
Первая часть индекса — индекс контроллера
Вторая часть — индекс диска
Опросим таблицу, ее столбец со статусом дисков:
administrator@zproxy2:~$ snmpwalk -c public -v 2c 192.168.0.22 1.3.6.1.4.1.232.3.2.5.1.1.5
iso.3.6.1.4.1.232.3.2.5.1.1.6.1.0 = INTEGER: 1
iso.3.6.1.4.1.232.3.2.5.1.1.6.1.1 = INTEGER: 2
iso.3.6.1.4.1.232.3.2.5.1.1.6.1.2 = INTEGER: 3
iso.3.6.1.4.1.232.3.2.5.1.1.6.1.3 = INTEGER: 4
iso.3.6.1.4.1.232.3.2.5.1.1.6.4.1 = INTEGER: 5
iso.3.6.1.4.1.232.3.2.5.1.1.6.4.2 = INTEGER: 6
iso.3.6.1.4.1.232.3.2.5.1.1.6.4.3 = INTEGER: 7
iso.3.6.1.4.1.232.3.2.5.1.1.6.4.4 = INTEGER: 8
Видим, что у нас восемь дисков (cpqDaPhyDrvIndex) расположенных на контроллерах под индексами 0 и 4 (cpqDaPhyCntlrIndex). В 2.0 через LLD нашлось бы только первые четыре диска.
Как настраивать обнаружение? Да точно также, как и LLD с обычными индексами:
Шаг 1: Сначала создаем обнаружение в шаблоне для HP:
| Ключ | cpqDaPhyDrvBay |
| SNMP OID | OID столбца в таблице, который будем использовать для поиска дисков. Будем использовать OID 1.3.6.1.4.1.232.3.2.5.1.1.5, это столбец, в котором содержится номер отсека диска (cpqDaPhyDrvBay). Значение данного столбца будет присвоено специальному макросу {#SNMPVALUE}, который мы можем использовать, например, в именах элементов данных или в именах триггеров |
| SNMP community | в данном примере используется макрос {$COMMUNITY}. В этом же шаблоне прописано значение по умолчанию, {$COMMUNITY}=public. Далее, для каждого конкретного узла сети, к которому мы прикрепим данный шаблон, мы можем либо переписать значение макроса, если его SNMP community будет иным, либо ничего не делать, и тогда будет использоваться прописанное в шаблоне public. Данный прием помогает избежать необходимости изменять элементы данных на уровне узла сети. |
| Фильтр | Полученное значение специального макроса {#SNMPVALUE} мы можем отфильтровать по regex, или оставить данное поле пустым, если ничего отсекать не требуется.
Раз мы заговорили про макросы, то напомню, что в LLD по SNMP их два: {#SNMPINDEX}, {#SNMPVALUE}. И для каждой найденной строчки в таблице они будут принимать значения: |
| Период сохранения потерянных ресурсов | Через сколько дней удалить элемент данных, когда он перестанет обнаруживаться (диск вытащили и унесли). По умолчанию оставляем 30 дней. |
Шаг 2: Создадим прототип элемента данных
Шаг 3: Создадим прототип триггера
Далее
Повторим шаги 2,3 для других интересных столбцов таблицы физических дисков.
Элементы данных:
Триггеры:
Повторим шаги 1-3 для других интересных таблиц в MIBах от HP, получим:
| SNMP-Таблица | Что интересного | Индекс таблицы |
|---|---|---|
| CMPQIDA-MIB:cpqDaCntlrTable | Статус RAID-контроллеров | Простой |
| CMPQIDA-MIB:cpqDaAccelTable | Статус Array Accelerator, контроль батарейки | Простой |
| CMPQIDA-MIB:cpqDaCntlrPerfTable | Производительность RAID, загрузка процессора RAID | Составной |
| CMPQIDA-MIB:cpqDaLogDrvTable | Статус логических дисков | Составной |
| CMPQIDA-MIB:cpqDaLogDrvPerfTable | Производительность логических дисков | Составной |
| CMPQHLTH-MIB:cpqHeTemperatureTable | Температура ЦПУ, памяти и других компонент | Составной |
| CMPQHLTH-MIB:cpqHeThermalFanTable | Статус вентиляторов | Простой |
| CMPQHLTH-MIB:cpqHeFltTolPowerSupplyTable | Статус блоков питания | Составной |
Что в системе будет выглядеть вот так:
Шаг 4: Добавляем наш шаблон к узлам сети HP
Указываем для них значение макроса {$COMMUNITY}, если оно отличное от public, ждем окончания работы LLD. Итог увидим в разделе Последние данные:
Итого
Теперь, когда Заббикс поддерживает составные индексы SNMP, существенно расширился список таблиц до которых может дотянуться рука LLD. А чем больше вы задействуете Low-level Discovery — тем меньше вы настраиваете в Заббиксе руками. Ручная работа с LLD — настройка прототипов в шаблоне. Но это нужно сделать только один раз.
P.S.
Прикладываю шаблон для HP, вдруг кому интересно.
<?xml version="1.0" encoding="UTF-8"?> <zabbix_export> <version>2.0</version> <date>2013-11-20T14:22:01Z</date> <groups> <group> <name>Templates</name> </group> </groups> <templates> <template> <template>Template_HP_InsightManager_SNMP</template> <name>Template_HP_InsightManager_SNMP</name> <groups> <group> <name>Templates_Production</name> </group> </groups> <applications> <application> <name>CMPQHLTH-MIB</name> </application> <application> <name>CMPQIDA-MIB</name> </application> <application> <name>CPQSINFO-MIB</name> </application> <application> <name>HP Platform</name> </application> <application> <name>RAID-контроллер(Accelerator) (CMPQIDA-MIB)</name> </application> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> <application> <name>Блоки питания(CPQHLTH-MIB)</name> </application> <application> <name>Вентиляторы(CMPQHLTH-MIB)</name> </application> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> <application> <name>Температура(CMPQHLTH-MIB)</name> </application> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <items> <item> <name>HP Platform: Cтатус системы</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.2.1.3.0</snmp_oid> <key>cpqSiMibCondition.0</key> <delay>300</delay> <history>90</history> <trends>30</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item> <item> <name>HP Platform: MIB version (major)</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.2.1.1.0</snmp_oid> <key>cpqSiMibRev.cpqSiMibRevMajor.0</key> <delay>86400</delay> <history>30</history> <trends>0</trends> <status>1</status> <value_type>3</value_type> <allowed_hosts>localhost</allowed_hosts> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>0</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>CPQSINFO-MIB</name> </application> </applications> <valuemap/> </item> <item> <name>HP Platform: MIB version (minor)</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.2.1.2.0</snmp_oid> <key>cpqSiMibRev.cpqSiMibRevMinor.0</key> <delay>86400</delay> <history>30</history> <trends>0</trends> <status>1</status> <value_type>3</value_type> <allowed_hosts>localhost</allowed_hosts> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>0</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>CPQSINFO-MIB</name> </application> </applications> <valuemap/> </item> <item> <name>HP Platform: Общий статус охлаждения</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.1.0</snmp_oid> <key>cpqHeThermalCondition.0</key> <delay>300</delay> <history>2</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item> <item> <name>HP Platform: Показания Т сенсоров</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.3.0</snmp_oid> <key>cpqHeThermalTempStatus</key> <delay>240</delay> <history>2</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item> <item> <name>HP Platform: Статус БП</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.9.1.0</snmp_oid> <key>cpqHeFltTolPwrSupplyCondition</key> <delay>300</delay> <history>2</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Блоки питания(CPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item> <item> <name>HP Platform: Статус ОЗУ</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.14.4.0</snmp_oid> <key>cpqHeResilentMemStatus.0</key> <delay>300</delay> <history>2</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item> <item> <name>HP Platform: модель</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.2.2.4.2.0</snmp_oid> <key>cpqSiProductName.0</key> <delay>86400</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>1</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap/> </item> <item> <name>HP Platform: серийный номер сервера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.2.2.2.1.0</snmp_oid> <key>cpqSiSysSerialNum.0</key> <delay>86400</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>8</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap/> </item> <item> <name>HP Platform: форм-фактор</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.2.2.2.2.0</snmp_oid> <key>cpqSiFormFactor.0</key> <delay>60</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqSiFormFactor Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.2.2.2.2 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqSystemInfo(2).cpqSiComponent(2).cpqSiAsset(2).cpqSiFormFactor(2) Module: CPQSINFO-MIB Parent: cpqSiAsset Previous sibling: cpqSiSysSerialNum Next sibling: cpqSiAssetTag Numerical syntax: Integer (32bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-write Value list: 1: unknown(1) 2: portable(2) 3: laptop(3) 4: desktop(4) 5: tower(5) 6: mini-tower(6) 7: rack-mount(7) Description: The form factor of the system. Setting this variable tounknown will fail.</description> <inventory_link>2</inventory_link> <applications> <application> <name>HP Platform</name> </application> </applications> <valuemap> <name>HP form factor</name> </valuemap> </item> </items> <discovery_rules> <discovery_rule> <name>CMPQHLTH-MIB:cpqHeFltTolPowerSupplyTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.6.2.9.3.1.2</snmp_oid> <key>cpqHeFltTolPowerSupplyBay</key> <delay>86400</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>14</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPVALUE} Статус блока питания</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.9.3.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}]</key> <delay>90</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqHeFltTolPowerSupplyStatus Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.6.2.9.3.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqHealth(6).cpqHeComponent(2).cpqHeFltTolPwrSupply(9).cpqHeFltTolPowerSupplyTable(3).cpqHeFltTolPowerSupplyEntry(1).cpqHeFltTolPowerSupplyStatus(5) Module: CPQHLTH-MIB Parent: cpqHeFltTolPowerSupplyEntry Previous sibling: cpqHeFltTolPowerSupplyCondition Next sibling: cpqHeFltTolPowerSupplyMainVoltage Numerical syntax: Integer (32bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: noError(1) 2: generalFailure(2) 3: bistFailure(3) 4: fanFailure(4) 5: tempFailure(5) 6: interlockOpen(6) 7: epromFailed(7) 8: vrefFailed(8) 9: dacFailed(9) 10: ramTestFailed(10) 11: voltageChannelFailed(11) 12: orringdiodeFailed(12) 13: brownOut(13) 14: giveupOnStartup(14) 15: nvramInvalid(15) 16: calibrationTableInvalid(16) Description: The status of the power supply.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Блоки питания(CPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP PSU Status</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}].last(0)}=3</expression> <name>[PSU] bistFailure(3) блока питания в отсеке {#SNMPVALUE}</name> <url/> <status>0</status> <priority>2</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}].last(0)}>5</expression> <name>[PSU] Другая ошибка блока питания в отсеке {#SNMPVALUE}</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}].last()}=4</expression> <name>[PSU] Не работает вентилятор на блоке питания в отсеке {#SNMPVALUE}</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}].last(0)}=2</expression> <name>[PSU] Общая ошибка блока питания в отсеке {#SNMPVALUE}</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPowerSupplyStatus.[{#SNMPINDEX}].last()}=5</expression> <name>[PSU] Перегрев блока питания в отсеке {#SNMPVALUE}</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQHLTH-MIB:cpqHeTemperatureTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.1</snmp_oid> <key>cpqHeTemperatureChassis</key> <delay>43200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Датчик температуры</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqHeTemperatureCelsius.[{#SNMPINDEX}]</key> <delay>300</delay> <history>7</history> <trends>30</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>C</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Температура(CMPQHLTH-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Расположение датчика температуры</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqHeTemperatureLocale.[{#SNMPINDEX}]</key> <delay>7200</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Температура(CMPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP T sensors locale</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Статус датчика температуры</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqHeTemperatureCondition.[{#SNMPINDEX}]</key> <delay>120</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Температура(CMPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeTemperatureCondition.[{#SNMPINDEX}].last(0)}=3</expression> <name>[TEMP] Температура {#SNMPINDEX} высокая</name> <url/> <status>0</status> <priority>3</priority> <description>Предупреждение</description> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeTemperatureCelsius.[{#SNMPINDEX}].last(0)}>40</expression> <name>[TEMP] Температура {#SNMPINDEX} высокая {ITEM.LASTVALUE}</name> <url/> <status>1</status> <priority>2</priority> <description>Предупреждение</description> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeTemperatureCondition.[{#SNMPINDEX}].last(0)}=4</expression> <name>[TEMP] Температура {#SNMPINDEX} очень высокая</name> <url/> <status>0</status> <priority>4</priority> <description>Предупреждение</description> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeTemperatureCelsius.[{#SNMPINDEX}].last(0)}>60</expression> <name>[TEMP] Температура {#SNMPINDEX} слишком высокая! {ITEM.LASTVALUE}</name> <url/> <status>1</status> <priority>4</priority> <description>Предупреждение</description> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes> <graph_prototype> <name>HP Температура[TESTING]</name> <width>900</width> <height>200</height> <yaxismin>0.0000</yaxismin> <yaxismax>100.0000</yaxismax> <show_work_period>1</show_work_period> <show_triggers>1</show_triggers> <type>0</type> <show_legend>1</show_legend> <show_3d>0</show_3d> <percent_left>0.0000</percent_left> <percent_right>0.0000</percent_right> <ymin_type_1>0</ymin_type_1> <ymax_type_1>0</ymax_type_1> <ymin_item_1>0</ymin_item_1> <ymax_item_1>0</ymax_item_1> <graph_items> <graph_item> <sortorder>0</sortorder> <drawtype>0</drawtype> <color>C80000</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqHeTemperatureCelsius.[{#SNMPINDEX}]</key> </item> </graph_item> </graph_items> </graph_prototype> </graph_prototypes> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQHLTH-MIB:cpqHeThermalFanTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.6.2.6.6.1.1</snmp_oid> <key>cpqHeThermalFanIndex</key> <delay>43200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Вентилятор установлен</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.6.6.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqHeThermalFanPresent.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>cpqHeThermalFanStatus Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.6.2.6.6.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqHealth(6).cpqHeComponent(2).cpqHeThermal(6).cpqHeThermalFanTable(6).cpqHeThermalFanEntry(1).cpqHeThermalFanStatus(5) Module: CPQHLTH-MIB Parent: cpqHeThermalFanEntry Prev sibling: cpqHeThermalFanCpuFan Next sibling: cpqHeThermalFanHwLocation Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ok(2) 3: failed(4) Description: This specifies if the fan described is operating properly. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. failed(4) The fan is not operating properly.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Вентиляторы(CMPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP Fan Present</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Скорость вращения вентилятора</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.6.6.1.7.{#SNMPINDEX}</snmp_oid> <key>cpqHeThermalFanCurrentSpeed.[{#SNMPINDEX}]</key> <delay>600</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>rpm</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>cpqHeThermalFanStatus Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.6.2.6.6.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqHealth(6).cpqHeComponent(2).cpqHeThermal(6).cpqHeThermalFanTable(6).cpqHeThermalFanEntry(1).cpqHeThermalFanStatus(5) Module: CPQHLTH-MIB Parent: cpqHeThermalFanEntry Prev sibling: cpqHeThermalFanCpuFan Next sibling: cpqHeThermalFanHwLocation Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ok(2) 3: failed(4) Description: This specifies if the fan described is operating properly. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. failed(4) The fan is not operating properly.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Вентиляторы(CMPQHLTH-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Статус вентилятора</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.6.6.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqHeThermalFanStatus.[{#SNMPINDEX}]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>cpqHeThermalFanStatus Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.6.2.6.6.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqHealth(6).cpqHeComponent(2).cpqHeThermal(6).cpqHeThermalFanTable(6).cpqHeThermalFanEntry(1).cpqHeThermalFanStatus(5) Module: CPQHLTH-MIB Parent: cpqHeThermalFanEntry Prev sibling: cpqHeThermalFanCpuFan Next sibling: cpqHeThermalFanHwLocation Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ok(2) 3: failed(4) Description: This specifies if the fan described is operating properly. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. failed(4) The fan is not operating properly.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Вентиляторы(CMPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP RAID SMART status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Тип вентилятора</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.6.6.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqHeThermalFanCpuFan.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>cpqHeThermalFanStatus Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.6.2.6.6.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqHealth(6).cpqHeComponent(2).cpqHeThermal(6).cpqHeThermalFanTable(6).cpqHeThermalFanEntry(1).cpqHeThermalFanStatus(5) Module: CPQHLTH-MIB Parent: cpqHeThermalFanEntry Prev sibling: cpqHeThermalFanCpuFan Next sibling: cpqHeThermalFanHwLocation Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ok(2) 3: failed(4) Description: This specifies if the fan described is operating properly. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. failed(4) The fan is not operating properly.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Вентиляторы(CMPQHLTH-MIB)</name> </application> </applications> <valuemap> <name>HP Fan Type</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqHeThermalFanStatus.[{#SNMPINDEX}].last(0)}=4</expression> <name>[TEMP.FAN] Вентилятор {#SNMPINDEX} вышел из строя</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaAccelTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.3.2.2.2.1.1</snmp_oid> <key>cpqDaAccelCntlrIndex</key> <delay>43200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description>Array Accelerator Board Controller Index. This value is a logical number whose meaning is OS dependent. The value has a direct mapping to the controller table index such that controller 'i' has accelerator table entry 'i'</description> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Код ошибки Accelator Board контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.2.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaAccelErrCode.["{#SNMPINDEX}"]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(Accelerator) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP AB Error code</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Состояние Accelator Board контроллера(cpqDaAccelCondition)</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.2.1.9.{#SNMPINDEX}</snmp_oid> <key>cpqDaAccelCondition.["{#SNMPINDEX}"]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(Accelerator) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Статус Accelator Board контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.2.1.2.{#SNMPINDEX}</snmp_oid> <key>cpqDaAccelStatus.["{#SNMPINDEX}"]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(Accelerator) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP AB Controller Statua</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaAccelCondition.["{#SNMPINDEX}"].last(0)}=3</expression> <name>[RAID.AB] Accelerator board {#SNMPINDEX} статус degraded(3)</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaAccelCondition.["{#SNMPINDEX}"].last(0)}=4</expression> <name>[RAID.AB] Accelerator board {#SNMPINDEX} статус failed(4)</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaCntlrPerfTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.3.2.7.1.1.1</snmp_oid> <key>cpqDaCntlrPerfCntlrIndex</key> <delay>48200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Загрузка ЦПУ RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.7.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrPerfCpuPercentBusy.[{#SNMPINDEX}]</key> <delay>180</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>%</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Средняя задержка RAID-контроллера, с</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>1</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.7.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrPerfAvgLatency.[{#SNMPINDEX}]</key> <delay>180</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>0</value_type> <allowed_hosts/> <units>s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>0.01</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaCntlrPerfCpuPercentBusy.[{#SNMPINDEX}].last(0)}>80&{Template_HP_InsightManager_SNMP:cpqDaCntlrPerfCpuPercentBusy.[{#SNMPINDEX}].last(0)}<1000</expression> <name>[RAID.CPU] {#SNMPINDEX} Загрузка процессора контроллера слишком велика</name> <url/> <status>0</status> <priority>4</priority> <description><1000 to avoid bugged readings</description> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes> <graph_prototype> <name>[RAID] Производительность RAID-контроллера</name> <width>900</width> <height>200</height> <yaxismin>0.0000</yaxismin> <yaxismax>100.0000</yaxismax> <show_work_period>1</show_work_period> <show_triggers>1</show_triggers> <type>0</type> <show_legend>1</show_legend> <show_3d>0</show_3d> <percent_left>0.0000</percent_left> <percent_right>0.0000</percent_right> <ymin_type_1>0</ymin_type_1> <ymax_type_1>0</ymax_type_1> <ymin_item_1>0</ymin_item_1> <ymax_item_1>0</ymax_item_1> <graph_items> <graph_item> <sortorder>0</sortorder> <drawtype>0</drawtype> <color>C80000</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaCntlrPerfCpuPercentBusy.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>1</sortorder> <drawtype>0</drawtype> <color>00C800</color> <yaxisside>1</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaCntlrPerfAvgLatency.[{#SNMPINDEX}]</key> </item> </graph_item> </graph_items> </graph_prototype> </graph_prototypes> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaCntlrTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.3.2.2.1.1.1</snmp_oid> <key>cpqDaCntlrIndex</key> <delay>43200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Кол-во внутренних портов RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.25.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrNumberOfInternalPorts.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqDaCntlrNumberOfInternalPorts Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.3.2.2.1.1.25 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqDriveArray(3).cpqDaComponent(2).cpqDaCntlr(2).cpqDaCntlrTable(1).cpqDaCntlrEntry(1).cpqDaCntlrNumberOfInternalPorts(25) Module: CPQIDA-MIB Parent: cpqDaCntlrEntry Previous sibling: cpqDaCntlrExpandPriority Next sibling: cpqDaCntlrNumberOfExternalPorts Numerical syntax: Integer (32bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Description: Array Controller Number of Internal Ports.This value is the number of internal SAS connectors on thecontroller.</description> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Модель RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.2.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrModel.["{#SNMPINDEX}"]</key> <delay>86400</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex>50/1-7,00:00-24:00</delay_flex> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqDaCntlrModel Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.3.2.2.1.1.2 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqDriveArray(3).cpqDaComponent(2).cpqDaCntlr(2).cpqDaCntlrTable(1).cpqDaCntlrEntry(1).cpqDaCntlrModel(2) Module: CPQIDA-MIB Parent: cpqDaCntlrEntry Prev sibling: cpqDaCntlrIndex Next sibling: cpqDaCntlrFWRev Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ida(2) 3: idaExpansion(3) 4: ida-2(4) 5: smart(5) 6: smart-2e(6) 7: smart-2p(7) 8: smart-2sl(8) 9: smart-3100es(9) 10: smart-3200(10) 11: smart-2dh(11) 12: smart-221(12) 13: sa-4250es(13) 14: sa-4200(14) 15: sa-integrated(15) 16: sa-431(16) 17: sa-5300(17) 18: raidLc2(18) 19: sa-5i(19) 20: sa-532(20) 21: sa-5312(21) 22: sa-641(22) 23: sa-642(23) 24: sa-6400(24) 25: sa-6400em(25) 26: sa-6i(26) 27: sa-generic(27) 28: sa-p600(29) 29: sa-p400(30) 30: sa-e200(31) 31: sa-e200i(32) 32: sa-p400i(33) 33: sa-p800(34) 34: sa-e500(35) 35: sa-p700m(36) Description: Array Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument agent(s). You have a drive array controller in the system that the instrument agent does not recognize. IDA (2) Compaq 32-Bit Intelligent Drive Array Controller. The physical drives are located inside the system. IDA Expansion (3) Compaq 32-Bit Intelligent Drive Array Expansion Controller. The physical drives are located in the Array Expansion System that is connected to the system by a cable. IDA - 2 (4) Compaq Intelligent Drive Array Controller-2 (IDA-2). The physical drives are located inside the system. SMART (5) Compaq SMART Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. SMART - 2/E (6) Compaq SMART-2/E Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. SMART - 2/P (7) Compaq SMART-2/P Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. SMART - 2SL (8) Compaq SMART-2SL Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Smart - 3100ES (9) Compaq Smart Array 3100ES Controller. The physical drives are located inside the system. Smart - 3200 (10) Compaq Smart Array 3200 Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. SMART - 2DH (11) Compaq SMART-2DH Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Smart - 221 (12) Compaq Smart Array 221 Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Smart Array 4250ES (13) Compaq Smart Array 4250ES Controller. The physical drives are located inside the system. Smart Array 4200 (14) Compaq Smart Array 4200 Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Integrated Smart Array (15) Compaq Integrated Smart Array Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Smart Array 431 (16) Compaq Smart Array 431 Controller. The physical drives can be located inside the system or outside the system in a ProLiant Storage System that is connected to the system by a cable. Smart Array 5300 (17) HP Smart Array 5300 Controller. RAID LC2 Controller (18) Compaq RAID LC2 Controller. Smart Array 5i (19) HP Smart Array 5i Controller. Smart Array 532 (20) Compaq Smart Array 532 Controller. Smart Array 5312 (21) Compaq Smart Array 5312 Controller. Smart Array 641 (22) HP Smart Array 641 Controller. Smart Array 642 (23) HP Smart Array 642 Controller. Smart Array 6400 (24) HP Smart Array 6400 Controller. Smart Array 6400 EM (25) HP Smart Array 6400 EM Controller. Smart Array 6i (26) HP Smart Array 6i Controller. Generic Array (27) Array Controller. Reserved (28) Smart Array P600 (29) HP Smart Array P600 Controller. Smart Array P400 (30) HP Smart Array P400 Controller. Smart Array E200 (31) HP Smart Array E200 Controller. Smart Array E200i (32) HP Smart Array E200i Controller. Smart Array P400i (33) HP Smart Array P400i Controller. Smart Array P800 (34) HP Smart Array P800 Controller. Smart Array E500 (35) HP Smart Array E500 Controller. Smart Array P700m (36) HP Smart Array P700m Controller.</description> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID модель</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Слот RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrSlot.["{#SNMPINDEX}"]</key> <delay>86400</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqDaCntlrSlot Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.3.2.2.1.1.5 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqDriveArray(3).cpqDaComponent(2).cpqDaCntlr(2).cpqDaCntlrTable(1).cpqDaCntlrEntry(1).cpqDaCntlrSlot(5) Module: CPQIDA-MIB Parent: cpqDaCntlrEntry Previous sibling: cpqDaCntlrStndIntr Next sibling: cpqDaCntlrCondition Numerical syntax: Integer (32bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Size list: 1: 0..255 Description: Array Controller Slot.This identifies the physical slot where the array controllerresides in the system. For example, if this value is three,the array controller is located in slot three of your computer.</description> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Статус RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrCondition.["{#SNMPINDEX}"]</key> <delay>120</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex>50/1-7,00:00-24:00</delay_flex> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Name: cpqDaCntlrCondition Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.3.2.2.1.1.6 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqDriveArray(3).cpqDaComponent(2).cpqDaCntlr(2).cpqDaCntlrTable(1).cpqDaCntlrEntry(1).cpqDaCntlrCondition(6) Module: CPQIDA-MIB Parent: cpqDaCntlrEntry Prev sibling: cpqDaCntlrSlot Next sibling: cpqDaCntlrProductRev Numerical syntax: Integer (32 bit) Base syntax: INTEGER Composed syntax: INTEGER Status: mandatory Max access: read-only Value list: 1: other(1) 2: ok(2) 3: degraded(3) 4: failed(4) Description: The condition of the device. This value represents the overall condition of this controller, and any associated logical drives, physical drives, and array accelerators.</description> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Текущая роль RAID-контроллера</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.9.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrCurrentRole.[{#SNMPINDEX}]</key> <delay>3600</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Controller Current Role.For duplexed array controllers, this is the controllers currentrole. The following values are valid:other (1) Indicates that the instrument agent does not recognize the role of the controller. You may need to upgrade the instrument agent.notDuplexed (2) This array controller is not duplexed.active (3) This duplexed array controller is the active controller.backup (4) This duplexed array controller is the backup controller.</description> <inventory_link>0</inventory_link> <applications> <application> <name>RAID-контроллер(CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID current role</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaCntlrCondition.["{#SNMPINDEX}"].last(0)}=3</expression> <name>[RAID.CONT] Контроллер {#SNMPINDEX} статус degraded(3)!</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaCntlrCondition.["{#SNMPINDEX}"].last(0)}=4</expression> <name>[RAID.CONT] Контроллер {#SNMPINDEX} статус failed(4)!</name> <url/> <status>0</status> <priority>5</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaLogDrvPerfTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.2</snmp_oid> <key>cpqDaLogDrvPerfIndex</key> <delay>48200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPINDEX} Cache hits</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.9.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfCacheHits.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>cacheHits/s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Cache misses</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.10.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfCacheMisses.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>cachemisses/s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Read Ahead Sectors</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.11.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfReadAheadSectors.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>sectors/s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Запись диска, Writes/s</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.7.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfWrites.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>Writes/s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Средняя длина очереди диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfAvgQueueDepth.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Logical Drive Performance Monitor Average Queue Depth. This value indicates the average command queue depth of the logical volume.</description> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPINDEX} Чтение диска, Read/s</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfReads.[{#SNMPINDEX}]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>Read/s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaLogDrvPerfAvgQueueDepth.[{#SNMPINDEX}].avg(300)}>2</expression> <name>[RAID.PERF] Длина очереди логического диска {#SNMPINDEX} слишком велика</name> <url/> <status>0</status> <priority>2</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes> <graph_prototype> <name>[RAID.PERF] {#SNMPINDEX } Производительность логического диска</name> <width>900</width> <height>200</height> <yaxismin>0.0000</yaxismin> <yaxismax>100.0000</yaxismax> <show_work_period>1</show_work_period> <show_triggers>1</show_triggers> <type>0</type> <show_legend>1</show_legend> <show_3d>0</show_3d> <percent_left>0.0000</percent_left> <percent_right>0.0000</percent_right> <ymin_type_1>0</ymin_type_1> <ymax_type_1>0</ymax_type_1> <ymin_item_1>0</ymin_item_1> <ymax_item_1>0</ymax_item_1> <graph_items> <graph_item> <sortorder>0</sortorder> <drawtype>0</drawtype> <color>C80000</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfWrites.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>1</sortorder> <drawtype>0</drawtype> <color>00C800</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfReads.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>2</sortorder> <drawtype>0</drawtype> <color>0000C8</color> <yaxisside>1</yaxisside> <calc_fnc>7</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfAvgQueueDepth.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>3</sortorder> <drawtype>0</drawtype> <color>C800C8</color> <yaxisside>1</yaxisside> <calc_fnc>7</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfCacheHits.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>4</sortorder> <drawtype>0</drawtype> <color>00C8C8</color> <yaxisside>1</yaxisside> <calc_fnc>7</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfCacheMisses.[{#SNMPINDEX}]</key> </item> </graph_item> <graph_item> <sortorder>5</sortorder> <drawtype>0</drawtype> <color>C8C800</color> <yaxisside>1</yaxisside> <calc_fnc>7</calc_fnc> <type>0</type> <item> <host>Template_HP_InsightManager_SNMP</host> <key>cpqDaLogDrvPerfReadAheadSectors.[{#SNMPINDEX}]</key> </item> </graph_item> </graph_items> </graph_prototype> </graph_prototypes> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaLogDrvTable</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.3.2.3.1.1.14</snmp_oid> <key>cpqDaLogDrvOsName</key> <delay>48200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description>Name: cpqDaLogDrvOsName Type: OBJECT-TYPE OID: 1.3.6.1.4.1.232.3.2.3.1.1.14 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).compaq(232).cpqDriveArray(3).cpqDaComponent(2).cpqDaLogDrv(3).cpqDaLogDrvTable(1).cpqDaLogDrvEntry(1).cpqDaLogDrvOsName(14) Module: CPQIDA-MIB Parent: cpqDaLogDrvEntry Previous sibling: cpqDaLogDrvStripeSize Next sibling: cpqDaLogDrvBlinkTime Numerical syntax: Octets Base syntax: OCTET STRING Composed syntax: DisplayString Status: mandatory Max access: read-only Size list: 1: 0..255 Description: Logical Drive OS Name.The OS name for this array logical drive. This field will bea null (size 0) string if the agent does not support OS name.</description> <item_prototypes> <item_prototype> <name>{#SNMPVALUE} Имя логического диска в ОС</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.14.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvOsName.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>7</history> <trends>365</trends> <status>0</status> <value_type>1</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Статус логического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.11.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvCondition.[{#SNMPINDEX}]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Текущее состояние логического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvStatus.[{#SNMPINDEX}]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID drive status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Тип отказоуйстойчивости логического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvFaultTol.[{#SNMPINDEX}]</key> <delay>180</delay> <history>30</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Логические диски(в RAID) (CMPQIDA-MIB)</name> </application> </applications> <valuemap> <name>HP RAID fault tolerance</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaLogDrvFaultTol.[{#SNMPINDEX}].last(0)}=2</expression> <name>[RAID.LDRIVE] Логический диск {#SNMPVALUE}.{#SNMPINDEX} не имеет отказоуйстойчивости.</name> <url/> <status>0</status> <priority>2</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>CMPQIDA-MIB:cpqDaPhyDrvEntry</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.5</snmp_oid> <key>cpqDaPhyDrvBay</key> <delay>43200</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter>:</filter> <lifetime>30</lifetime> <description/> <item_prototypes> <item_prototype> <name>{#SNMPVALUE} Кол-во наработанных часов физического диска, ч</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>1</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.9.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvRefHours.[{#SNMPINDEX}]</key> <delay>3600</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>s</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>3600</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Кол-во перемещенных секторов физического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.8.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvUsedReallocs.[{#SNMPINDEX}]</key> <delay>900</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Модель физического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvModel.[{#SNMPINDEX}]</key> <delay>7200</delay> <history>7</history> <trends>365</trends> <status>0</status> <value_type>1</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Номер отсека физического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvBay.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap/> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Скорость вращения</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.59.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvRotationalSpeed.[{#SNMPINDEX}]</key> <delay>86400</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap> <name>HP Phys disck rotation speed</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Статус SMART физического диска</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.57.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvSmartStatus.[{#SNMPINDEX}]</key> <delay>900</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap> <name>HP RAID SMART status</name> </valuemap> </item_prototype> <item_prototype> <name>{#SNMPVALUE} Статус физического диска (cpqDaPhyDrvStatus)</name> <type>4</type> <snmp_community>{$COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvStatus.[{#SNMPINDEX}]</key> <delay>300</delay> <history>7</history> <trends>0</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>Физические диски(в RAID) (CMPQIDA-MIB))</name> </application> </applications> <valuemap> <name>HP RAID physical disk status</name> </valuemap> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaPhyDrvStatus.[{#SNMPINDEX}].last(0)}=4</expression> <name>[HDD.FAIL] {#SNMPINDEX} Ожидается выход из строя, статус predictiveFailure(4).</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaPhyDrvStatus.[{#SNMPINDEX}].last(0)}=3</expression> <name>[HDD.FAIL] {#SNMPINDEX} Сбой диска, статус failed(3).</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaPhyDrvUsedReallocs.[{#SNMPINDEX}].prev(0)}>0&{Template_HP_InsightManager_SNMP:cpqDaPhyDrvUsedReallocs.[{#SNMPINDEX}].change(0)}>0</expression> <name>[HDD.REALLOC] {#SNMPINDEX} Кол-во перемещенных секторов увеличилось!</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> <trigger_prototype> <expression>{Template_HP_InsightManager_SNMP:cpqDaPhyDrvSmartStatus.[{#SNMPINDEX}].last(0)}=3</expression> <name>[HDD.SMART] {#SNMPINDEX} SMART статус: predictiveFailure(3). Замените диск</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> </discovery_rules> <macros> <macro> <macro>{$COMMUNITY}</macro> <value>virton</value> </macro> <macro> <macro>{$CPQDACNTLRPERFCNTLRINDEX}</macro> <value>1</value> </macro> <macro> <macro>{$CPQDALOGDRVPERFCNTLRINDEX}</macro> <value>1</value> </macro> <macro> <macro>{$CPQDALOGDRVPERFINDEX1}</macro> <value>1</value> </macro> <macro> <macro>{$CPQDALOGDRVPERFINDEX2}</macro> <value>2</value> </macro> </macros> <templates/> <screens/> </template> </templates> <triggers> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqHeFltTolPwrSupplyCondition.last(0)}>2</expression> <name>HP: Один из БП вышел из строя!</name> <url/> <status>0</status> <priority>5</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqHeResilentMemStatus.0.last(0)}>2</expression> <name>HP: Ошибка модулей ОЗУ!</name> <url/> <status>0</status> <priority>5</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqHeThermalTempStatus.last(0)}>2</expression> <name>HP: Перегрев!</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqHeThermalCondition.0.last(0)}>2</expression> <name>HP: Проблемы с охлаждением!</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqSiMibCondition.0.last(0)}>2</expression> <name>HP: Проверьте сервер</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template_HP_InsightManager_SNMP:cpqSiMibCondition.0.nodata(1800)}=1</expression> <name>[AV.SNMP] HP-SNMP-AGENT не отвечает. Мониторинг по SNMP недоступен.</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> <dependencies/> </trigger> </triggers> </zabbix_export>
P.S.
Автор статьи wabbit.
ссылка на оригинал статьи http://habrahabr.ru/company/zabbix/blog/203050/
Добавить комментарий